OptiClimate connection set for all models of the OptiClimate with a multitude of connection possibilities including magnetic valve, LDPE connectors, vibration insulating rubbers, condensate water connecting nipple, teflon tape, adhesive gel, 7m cord ...
OptiClimate water leakage safeguard. The OptiClimate water leakage safeguard detects even the slightest bit of water (0,5mm) in the system, after which it alarms and blocks the water and power supply to the connected device via a solenoid valve.
The OptiClimate 6000 PRO3 water-cooled air conditioner has a cooling capacity of 6kW, uses between 2 and 4 liters of water x minute and has 3x1500W heating elements.
The OptiClimate 3500 PRO3 water-cooled air conditioner has a cooling capacity of 3,5kW, uses between 1 and 2 liters of water x minute and has 2x1500W heating elements.
Required if the OptiClimate is installed lower than the drain. Max 4 meters lifting. Suitable for a 7/4MM PVC hose. The lift pump is required if the OptiClimate is installed below the drain and the condensation water cannot flow way from the slope.
Three-way valve 355mm for 10000, 15000 PRO3 and PRO4
has been added to your shopping cart
OptiClimate three-way valve 355mm for 10000, 15000 PRO3 and PRO4. This three-way valve for the OptiClimate 10000, 15000 PRO3 and PRO4 should be used within the Dual Room setup: only one OptiClimate will be required to cool two rooms.
OptiClimate cable for remote control. This OptiClimate cable for the remote control of the OptiClimate water-cooled airco comes standard with all the models of the OptiClimate but is also available separately.
OptiClimate 3500 PRO3 Split EX air-cooled airco. The OptiClimate 3500 PRO3 Split EX aircooled airco has a cooling capacity of 3,5 kW. The OptiClimate 3500 PRO3 Split EX uses 820W and has 2x1500W heating elements. Extended Reach 30m.
The OptiClimate 10000 PRO3 water-cooled air conditioner has a cooling capacity of 10 kW, uses between 3 and 6 liters of water x minute and has 3x2000W heating elements.
The OptiClimate hygrostat with light cell and moisture meter automatically controls the dehumidification function during the night. Including light sensor for automatic day/night programme. Comes standard with the OptiClimate.
OptiClimate CO2 Generator BioGreen Propane (LPG) 1-4KW. The OptiClimate CO2 generator Biogreen with Pilot Burner and infinitely variable control is suitable for rooms from 4 to 30 m2 and is ideal for use in combination with an OptiClimate watercooled...
OptiClimate 10000 PRO3 Split EX air-cooled airco. The OptiClimate 10000 PRO 3 Split EX has a cooling capacity of 10kW. The OptiClimate 10000 PRO3 Split EX uses 2390W and has 3x2000W heating elements. Extended Reach 30m.
OptiClimate Plenumbox 10000 PRO3 and PRO4. The plenum box is an insulated case that can be installed at the back of the OptiClimate 10000 PRO3 and PRO4. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Roo...
OptiClimate Plenumbox 6000 PRO3 and PRO4. The plenum box is an insulated case that can be installed at the back of the OptiClimate 6000 PRO3 and PRO4. With a plenum box it is possible to place the OptiClimate outside the room or to use the Dual Room ...